HomeMy WebLinkAbout2005-275
I
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
RESOLUTION NO. ~OQi-275
RESOLUTION OF THE MAYOR AND COMMON COUNCil OF THE CITY OF
SAN BERNARDINO AUTHORIZING THE EXECUTION OF A PURCHASE ORDER
TO CREST CHEVROLET FOR A 2006 4WD TAHOE COMMAND VEHICLE TO BE
UTILIZED BY THE FIRE DEPARTMENT.
BE IT RESOLVED BY THE MAYOR AND COMMON COUNCil OF THE CITY
OF SAN BERNARDINO AS FOllOWS:
SECTION 1. That Crest Chevrolet has agreed to be the primary vendor for the
negotiated purchase of a 2006 4WD Tahoe Command Vehicle in the total amount of
$59,777.68. Pursuant to this determination the Purchasing Manager is hereby
authorized to issue a purchase order to Crest Chevrolet in the amount of $59,777.68.
SECTION 2. The Purchase Order shall reference this Resolution No.2005- 275
and shall read, "Crest Chevrolet - Purchase of a 2006 4WD Tahoe Command Vehicle"
P.O. not to exceed $59,777.68 and shall incorporate the terms and conditions of the
purchase order.
SECTION 3. The authorization to execute the above referenced Purchase
Order is rescinded if not issued within sixty (60) days of the passage of this resolution.
11/
11/
11/
11/
11/
11/
11/
11/
11/
June 29, 2005
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
RESOLUTION OF THE MAYOR AND COMMON COUNCIL OF THE CITY OF
SAN BeRNAROINOAUTHORIZING THE EXECUTION OF A PURCHASE ORDER
TO CREST CHEvROLET FOR A 2006 4WD TAHOE COMMAND VEHICLE TO BE
UTILIZED BY THE FIRE DEPARTMENT.
I HEREBY CERTIFY that the foregoing Resolution was duly adopted by the
Mayor and Common Council of the City of San Bernardino at a j oint regular
meeting thereof, held on the 1st
day of August
, 2005, by the
following vote, to wit:
Council Members: AYES NAYS ABSTAIN ABSENT
ESTRADA x
LONGVILLE x
MCGINNIS x
DERRY x
KELLEY x
JOHNSON x
MCCAMMACK x
Q~ h.~
Ra'Che1 G. Clark, City C~
is hereby app' ed this? day of
The foregoing resolution
August ,2005.
udith Valles, Mayor
City of San Bernardino
Approved as to
Form and legal content:
JAMES F. PENMAN,
25 City Attorney
26
27
28
June 29,2005
j"""""_~~'"~7c' ",C, """ '17'''~' '"','C, ""
~~~~~,
'C, ,
.
.."..C......
r,
; ~QUEST FOR QUOTES:
DESCRIPTION OF RFQ:
BIDDER'S NAME/ADDRESS:
RFQ F-OS-32
/' {, '. ,',- '.
File Department CODDDand Vehicle
Cl&sr CHEVROLET 'ff ",-
- - -- -........ ..
909_ W. "21st; .siREET '
"-'.
A _ ~:.........,.
~. _c
C::AN RR1lNA1lDTa((). r.A Q?.&n'i .-
NAME/TELEPHONE NO. OF
AuniORIZED REPRESENTATIVE FLOY12 N,ORDSTROM-'-FLEET MANAGER
^,- ..
909"..883-8833 '
Please provide detai1ed Firm Fixed Price cost information in the spaces provided below,
and any other incidental or additional costs required to complete the Technical
Specification requirements,
PRICE FORM
FIRE DEPARTMENT COMMAND VEmCLE
PRICE FORM
(Include Sales Tax and ShippinglFreight for eacb item)
1.
File Department Command Vehicle (as specified)
~W& SALES TAX
8lm~ CALIF. TIRE FEE
TOTAL
S 55,470.00
S 4,29~.93
2.
3.
50
8.75
$ 59,777.68
Are there any other additional or incidental costs, which will be required by ~ flIDl in
order to meet the requiremeQts of the Technical Specifications? Yes I . (circle
one). If you answered "Yes", please provide detail of said additional coStS:
Please indicate any elements of the Technical Specifications that cannot be met by your'
finn.
*CONVERSION WORK TO BE DONE BY JOHNSON QEUIPMENT OF ORANGE
21
. ..- ,:.-:+-~~'~" -
.....~
---~._< .... ,-.
-,.._-
-T~___
,
.. "
Have you included in your bid all infotmational items and fonns as requ~ I No
(citcle one).1fyou answered '"No", please explain:
This o~ sball remain fmn for 90 days from RFQ close date.
Terms and conditions as set fonh in this RFQ apply to this bid.
Cash discount allowable % C dayS; unless otherwise stated, payment tenDS are: Net
thirty (30) days.
In signing this bid, Bidder wamntsthat all certifications and documents requested herein
are attacbed and properly completed and signed.
From time to time. the City may issue one or more addenda to this RFQ. Below, please
indicak all Addenda to this RFQ received by your firm. and the date. said Addenda
wasIwere received.
Verification of Addenda Received
Addenda No:
Addenda No:
Addenda No:
Received on:
Received on:
R=>ved~
~ ~f-;;:-
AUTHORIZED SIGNATURE:
PRINT SIGNER'S NAME AND TITLE: FLOYD NORD8TRON "".1<:1<:7' MANAr.RP
DATE SIGNED:
- .
\c:>- :l-\.":;' O~ ::
PHONE:909-883-8833
CRESTCHEVROLET 909 W. 21st ..sr.
SAN BERNARDINO, t:A. 92405
FAJ{:909-883-7968
COMPANY NAME & ADDRESS:
!2
-
- ------=--- - - - ~= -- - - -
,
.~
--=
.u
'--""
""~ <
"". " '
City of San Bernardino
TECHNICAL SPECIFICA nONS
BID SPECIFICATION NO. RFQ F-05-32
FIRE DEPARTMENT COMMAND VEHICLE
NOTICE : "SPECIAL INSTRUCTIONS TO THE BIDDER"
GENERAL INTENT
It is the intent of these specifications to cover the furnishing and delivery to the purchaser of a ,
complete command vehicle as hereinafter specified With a view to obtaining the best results and
the most acceptable vehicle for use in the fire department these specifications cover only the
minimum requirements as to the type of construction the vehicle must conform to.
Bids shall only be accepted from companies which have an established reputation in the field of
fire and police vehicle construction. The complete conversion process shall be completed in one
facility for sole source warranty.
Each bidder shall furnish satisfactory evidence of their ability to construct the vehicle specified
and shall state the location of the facility where the vehicle is to be built. The company shan also
show that they are in a position to render prompt service and to furnish replacement parts for
said vehicle.
Each bid shan be accompanied by a set of contractor's specifications written in their text. Word
for word copies of these specifications will not be accepted
OUALITY AND WORKMANSmp
The design of the vehicle must embody the latest approved engineering practices.
The workmanship must be of the highest quality in its respective field Special consideration
shan be given to the fonowing points: accessibility of the various components which may require
periodic maintenance, ease of operation, and symmetrical proportions.
WARRANTY
The complete package being bid on shan carry a minimum of a one year parts and labor
warranty. This warranty shall cover components, electrical system, and etc. The bidder shan
supply a copy of the warranty certificate at the time of bid. (NO EXCEPTION)
6
-
SECTION 1- VEHICLE AND EMERGENCY EOUIPMENT
VEHICLE SPECIFICATIONS
The vehicle shall be a model year 2005, or current available model year, new and unused
Chevrolet Tahoe or GMC Yukon. The vehicle shall be a 1500 four wheel drive model. The
vehicle shall be equipped with a rear lift gat~. Model year being bid shall be listed in bid
documentation (NO EXCEPTIONS).
VEHICLE MODEL
The vehicle shall be equipped with the IS] preferred equipment group. The base model with
upgraded options will not be acceptable (NO EXCEPTIONS). No deletions to the standard
package will be allowed as well, except as directly specified.
WHEELBASE
The vehicle shall have a minimum wheelbase of 115.9".
OVERALL LENGTH
The overall length of the vehicle shall be no greater than 199".
VEHICLE ENGINE
The vehicle shall be equipped with the Vortec 5300 (325 c.i) V8 engine with sequential fuel
injection. The engine shall have 295 hp at 5200 rpm and 335 Ib-ft of torque at 4000 rpm. The
engine shan meet California smog standards and be equipped with the largest oil cooler available
from the factory.
VEHICLE TRANSMISSION
The vehicle shall be equipped with a heavy duty four speed electronically automatic overdrive
transmission. The vehicle shall be equipped witb the largest transmission oil cooler available
from the factory.
TRANSFER CASE
The vehicle shall include the autQtrac electronic shift transfer case. The transfer case when set in
automatic made will automatically switch 4wd on or offwith loss and gain of traction.
EXHAUST
The exhaust system shall be an aluminized stainless steel system.
FUEL TANK
7
~._-"
..,
'H"-~'~'
.~.'
The fuel tank shall be a minimum of26 u.s. gallons.
.~
The gross vehicle weight shall be a minimum of 6800 Ibs.
FRONT SUSPENSION
The front suspension shall be of a torsion bar design with stabilizer bar.
REAR SUSPENSION
The rear suspension shall be of a multi link coil spring design with stabilizer bar.
REAR AXLE
The vehicle shall be equipped with a heavy duty single speed locking differential. The ratio shall
be 4.10. 1:'
,-1 '
"7
BRAKE SYSTEM
The vehicle shall be equipped with power front and rear disc brakes. The vehicle shall be
equipped with four wheel anti-lock brakes. The vehicle's front rotors shall be 12" diameter x
. J.I 'thick with a swept area of213.4 sq. inches and the rear rotors shall be 12.9" diameter x 1.2"
thick and shall have a swept area of 223.7 square inches.
POWER STEERING
The vehicle shall be equipped with power assisted recirculating ball steering with a ratio of
12.7: 1. The vehicle shall have a turning radius ofless than 40 feet
TIRES AND WHEELS
The vehicle shall be equipped with P26SnOR-16 blackwall all season tubeless tires. The vehicle
shall be equipped with cast aluminum wheels and chrome plated hub covers. The vehicle shall be
equipped with a full size spare steel Wheel and tire mounted under the rear frame of the vehicle.
The vehicle shall include a tire pressure monitor in the factory installed driver information
center.
TOW HOOKS
The vehicle shall be equipped with two factory installed front tow hoou
8
_",__w'
!SKID PLATES
The vehicle shall include a factory installed skid plate package. The skid plates shall protect the
front under body, transfer case, oil pan, and front differential.
TRAILERlNG PACKAGE
The vehicle shall be equipped with the factory trailer towing package. This package shall be
included so that the vehicle is equipped with the largest available coolers and electrical systems.
The.tratlerin~J>ackage shall include the towing platfonn and a seven wire trailer wiring harness.
AIR CONDITIONING
The vehicle shaH be equipped with factory tri-zone air conditioning. The freon shaH be the non-
ozone depleting R134A refrigerant.
MIRRORS
The outside mirrors shaH be heated electric fold away type mirrors. The mirrors shall be
electricaHy adjustable from the driver's seat. The inside rear view mirror shall be an automatic
dimming type,to reduce glare at night.
KEYLESS ENTRY
The vehicle shall be equipped with the factory keyless entry package. The keyless entry shaH
include 2 remotes and 2 keys.
WINDOW TINTING
The vehicle shaH be equipped with the factory deep ray solar tinted glass. This deep tinted glass
must be installed to block the sunlight from damaging the interior woodwork.
POWER WINDOWS
The vehicle shall be equipped with factory power windows with the express down feature.
WINDSHIELD WIPERS
The vehicle shall be equipped with intermittent wet arm type wipers with pulse washer system.
The rear liftgate shaH include a wiper and washer. .
ELECTRIC REAR WINDOW DEFROSTER
The vehicle shaH include an electric rear window defroster.
9
_-..-"'C~"P"'""lV-"F'" 'Yv~". "m,'
",.""",, ....
PEDALS
The vehicle shall include electrically adjustable pedals
)
L
SEATING
, i. i- 10
L.-,',:/
The vehicle shall be equipped with a front bench seat and one rear seat. The vehicle interior shall
be gray/dark charcoal cloth seating. The driver's seat shall be a six way power seat.
SUtPLEMENTAL RESTRAINT SYSTEM
The vehicle shall be equipped with driver and passenger side front dual stage air bags. The
passenger side airbag shall be disabled with a keyed switch due to the MDC installation. The
driver side airba.g shall remain fully functional.
HEADLAMPS
Theheadlamps shall be dual composite replaceable halogen head lamps. The vehicle shall have
automatic daytime running lights with automatic lighting controls.
FOGLAMPS
I
I
I
I
I
I
I
The vehicle shall be equipped with halogen rectangular foglamps.
BUMPERS
The vehicle shall be equipped with chrome plated front and rear bumpers. The rear bumper shall
be a factory step bumper.
PAINT
The vehicle shall be painted the factory Victory Red. After maIket paint jobs will not be
accepted. (NO EXCEPTIONS)
LUGGAGE RACK
The vehicle shan include factory installed roof rack side rails. No center rails will be included.
LETTERING
I
The vehicle shall be equipped with 22k large engine turn gold leaflettering with a black drop
shadow. The Gold Leaf Lettering shall consist of "SAN BERNARDINO" in an arch above the
reflective stripe. The word "CITY" in Gold Leaf Lettering on the reflective stripe and "FIRE" in
Gold Leaf Lettering below -the stripe. The left side of the rear liftgate shall have 9 inch tall letters
"SBFD" in 3M680-1 0 and the right side of the rear liftgate shall have "BOO" along with a 3
digit unit number in 3M 680-10 reflective vinyl. The lettering design shall be similar to the
f
10
I
~"""'m""'"
'7""""~,,,,_7_ .
cum:nt Chevrolet Tahoe's. A CAD drawing of the graphics shall be submitted at the time of bid
(NO EXCEPTIONS)
,STRIPING
The vehicle shall be equipped with a 4" 680-10 3M reflective white stripe. The stripe shall be
placed midway up the side doors of the vehicle and raise above the rear fenders utilizing a
digitally printed (shadowed) S-ribbon type stripe to raise the level of me stripe to clear the rear
fender' The stripe shall have "BATTALION CHIEF" placed in the stripe on both sides of the
vehicleabovcrihe rear fenders. The stripe shall be similar to the current Chevrolet Tahoe's. A
CAD drawing of the graphics shall be submitted at the time of bid. (NO EXCEPTIONS)
, ALTERNATOR
The vehicle shan be equipped with a 200 amp Quality Power internally regulated alternator. The
alternator shall be rated at a minimum of 200 amps. The alternator shall carry a one year " "
warranty.
The vehicle shall have a dual battery system installed. The batteries shall be Odyssey dry cen
batteries. The batteries shan be isolated with a continuous duty solenoid rated at a minimum of
200 amps. The dual battery system shall be wired as an isolated system with the ignition in the
off position and parallel with ignition in the on position. All cable in the battery system shall be a
minimum of2 gauge red (positive) and black (ground) cable. The cables shan be connected to
the battery with either lead battery connectors or seamless tinned copper lugs for corrosion
resistance. The entire battery cable system shall utilize seamless copper lugs to match gauge of
wire. The vehicle battery system shall be equipped with a jump start feature to jump-start the
vehicle battery from the auxiliary battery with the flip of a switch within the vehicle.
ELECTRICAL SYSTEM
The main power cable entering the vehicle for warning lamps shall be a 4ga cable with a 150
amp manual reset circuit breaker. The main power cable entering the vehicle for the radio
equipment shall be a 4 gauge cable with a 100 amp manual reset circuit breaker and sbalt
terminate in the radio compartment ~ a gold plated fuse block utilizing AGU fuses. The 4 gauge
cable shan be of the design to carry the most current available, therefore it is required that this
cable bave an outside diameter of at least .425 and a minimum of 1670 strands. The cable shan
be clearly marked with the size and type every foot All battery cable added to t~ vehicle shall
have shrink tube over all connections, this shrink tube shan have a silicone inner wall for
maximum sealing. All wiring added to the vehicle shan be high temperature gxl crosslink wire,
the wire shall be rated at a minimum temp. of250 degrees f. All wiring shall be permanently
marked with function every three inches. This marked wire must be used to aid service
technicians beyond vehicle warranty. Any crimp type connectors used shall be the nylon heavy
duty type, standard duty vinyl connectors are not acceptable. Any use of insulation displacement
type connectors (i.e. scotchlok connectors) is unacceptable. All wires shall be enclosed in 300.
deg. min. high temp. split poly 100m. An split loom shall be the high temp. type with a gray
1\
.~~
--e-
-,
------ .
-.._,--
stripe for identification. Any wires that pass through sheetrnetal shall be protected with plastic or
rubber grommets. (NO EXCEPTIONS TO ANY PART OF THIS SECTION WILL BE
ALLOWED)
LOAD MANAGER
The vehicle's electrical system shall be equipped with a Class I model 100756 electrical system
manager. The device shall monitor and control the electrical system and be capable oftoad
sequencing, load shedding, automatic load reset, dual battery monitoring, and fast idle activation.
The device shall incorporate an indicator to be mounted on the vehicle dashboard which allows
an operator ft)"d.ifferentiate levels of battery discharge rates. The device shall be protected a.gainst
reverse polarity and shorted outputs, and be enclosed in a metal enclosure to enhance emilrfi
protection. The load manager system shall bave a manual override switch installed within the
vehicle for over riding the system in the case of component failure.
HIGH IDLE SYSTEM
The vehicle shall have an electronic high idle system installed. The high idle system shall be
fully automatic, requiring no switches or manual controls for normal operation. The high idle
system shall only operate when the system voltage drops to 12.3 volts the high idle system shall
disengage any time the brake pedal is depressed or the vehicle is out of park. The high idle
system shall include a switch for manual activation.
ELECTRONIC SIREN
The siren shall be a Unitrol Touchmaster TM4-1 siren. The siren shall have the horn ring feature
and park kill options installed. The siren shall also inc1ude a NCOR remote microphone cable
and microphone for PA use. The siren shall carry a five year warranty.
SIREN SPEAKERS
The vehicle shall have two Wbelen SA314A speakers behind the grille. Speakers mounted below
the bumper will not be acceptable. The speakers shaH have 100 watt drivers.
LED LlGHTBAR
The vehicle shall be equipped with a.~ode-3 LED X 2100 47" tightbar The lightbar shan be
equipped with two 35 watt MR-8 alley lights, .six LED X flashing red LED modules, two LED X
steady red LED modules, two pairs LED X red corner modules. The lightbar sOOll be mounted
utilizing stainless steel hardware. .
LED ARROWSTICK
The vehicle shall be equipped with a Code.3 LED NASL847RR-35 narrowstick. The
narrowstick shall be mounted on the rear of the vehicle just forward of the rear liftgate. The
narrowstick shall incorporate two red warning lights in each end which shall operate independent
of the arrowstick. The narrowstick shall be mounted utilizing stainless steel hardware.
12
'-""''''''''i--'' - - T " _IT_. --"
GRILL LIGHTS
The vehicle shall have two grill lights installed in the front grill the lights shall be Code-3 LED
X LXEXIF-R red LED light modules with aluminum bezels.
INTERSECTION LIGHTS
The vehicle shall have two griJllights installed in the front grill the lights shall be Code-) LED
X LXEX2F-WR red/clear LED light modules with aluminum bezels
Sn08ELIGBTS
The vehicle shall have four Code-3 2HIDCL undercover strobe lights mounted in the taillights
and front directional lights. These lights shall be powered by the Code-3 PSE-475 power supply.
STROBE POWER SUPPLY
The vehicle strobe lights shall be equipped with a Code-3 PSE-475 power supply. The power
supply shall carry a five year warranty.
HEADLIGHT FLASHER
The vehicle shall be equipped with a Sound Off Power Pulse flasher. The flasher shall alternate
the lights at 3.0 flashes per second. The headlight flasher shall carry a three year warranty.
SPOTLIGHTS
The vehicle shall be equipped with two chrome plated 6" unity spotlights. The spotlights shall be
mounted on the front pillars of the vehicle.
FLASHLIGHT INSTALLATION
The vehicle shall include installation of a customer supplied re-chargeable maglight. The
maglight shall be mounted so that is within reach of the driver upon exiting the vehicle. The
charger shall be wired to the battery for continuous charging without the key on.
BACK UP ALARM
The vehicle shall be equipped with Code-3 D4SOC back up alarm.
BATTERY CHARGER
The vehicle shall include Truecharge 20 dual bank battery charger. The charger shall be mounted
in the rear command unit. The charger installation shall include a Kussmaul 15 amp Super Auto
Eject plug with gray cover. The plug shall be mounted on the drivers side of the in the rear
bumper.
13
""'-~'.~"""'"
MAPLlGHT
The vehicle shall include one Littlelite map lights. The maplight shall be a LFl8TR mounted on
the front console.
POWER POINT
The vehicle shall be equipped with a three way power point mounted on the left rear side of the
inside desk. This power point shall be capable of powering a laptop computer. cellular telephone,
tigh~, ~tc
-~
FRONT CONSOLE
The front console shall be a Johnson Equipment Co. Model 1112 or approved equivalent. The
console shall be made from select red birch, banded and finished with three coats of urethane
marine spar varnish. The forward portion of the console shall be designed to hold the siren head
and radios. The surface measurements are II" x 12". The rear of the console shall have tracks 'to
mount hanging file folders for hanging maps, plans, and other vital information.
INSIDE DESK
'~-
,',
'The inside desk shall be a custom unit tailored exactly to the needs of the rite department. The
desk 'Shalt match the units that are being used currently by the fire department The inside desk
shall include a file drawer. The exterior of the module snail be made from select red birch, while
the interiors are made from mahogany and other solid woods. The drawer installed the cabinet
'. shall nave 'a laminate finish to resist the wearing of the varnish while the vehicle is traveling. The
module shall be banded and finished with three coats of marine varnish. The file drawer shall
have slides of a 140 lb. capacity. Side cabinets shall be fully accessible for radio and additional
storage space. The cabinet doors shall be equipped with marine quality self closing hinges and
finger holes for opening. All latches shall be marine quality and chrome plated. All exposed
catpet edges are to be bound in gray vinyl.
14
~-
~ m.,
-._--
.- ---~~-~~
SECTION 2- RADIO AND ELECTRONICS INSTALLATION
800M HZ RADIO INSTALLATION
The vehicle shall include insta1lation of two customer supplied Motorola 800Mhz radios. The
radios shall be 800Mhz. radios with remote mounted control heads. The radios shall be mounted
behind the plastics on the sides of the rear cargo area (ifspace permits). The front control head
sha1l be mounted in the forward section of the center console. The front speakers shall be
mounted each side of the center console.
VHF RADIO-INST ALLA TION
The vehicle sha1l include installation of a customer supplied Motorola VHF radio. The radio
shall be a VHF radio with a remote mounted control head. The radio shall be mounted behind the
plastics on the sides of the rear cargo area (if space permits). The front (:ontrol head shall be
mounted in the forward section of the center console. The front speaker shall be mounted on the
left side of the center console.
MDC INSTALLA nON
, The vehicle shall include installation of a customer supplied Mobile Data Computer. The MDC
installation shall include Land E mounting brackets to be supplied by the vehicle builder.
INTERCOM SYSTEM
The vehicle shall include a three radio intercom system. The intercom system shall be consistent
with the operation of the current command vehicles. The system shall provide a minimum of
24db hearing protection by the use of David Clark H3432 or equal noise canceling headsets. The
system shall include 2 headset locations as directed. Each headset shan have the ability to
control its own volume either by a knob on the headset or at the headset jack. The intercom
system shall enable the individual stations to communicate freely via a VOX operated intercom
system. All intercom cables shall be-ofmulti-pair shielded cable. The communications interface
shall include three radio interface devices with removable plugs in connecting to the radios. The
system shall be capable of transmitting via any radio separately from eacb other. The system
shall have the ability to listen to any selection of the radios simultaneously. All existing speakers
and microphones shall remain operationally independent of the intercom system. The
communication system shall be C8I'l'ble of automatic system wide. voice switched, muting of
background noise. The muting system shall be completely automatic 1lIld be switched by any
voice of radio transmission. The system shall be capable of transmitting at receiving at any of the
three locations. The communications system shall include two headsets. A public" address system
interface capable of operation from either of the two front jacks shall be included. The public
address system shall prevent simultaneous transmission on the radio when the P A YTT is
depressed. The communications system shall be free from any unwanted electrical sounds (i.e.
alternator whine, electronic siren, etc.). The system shall include 2 headsets
CELLULAR TELEPHONE
IS
--
,-
.. ... . .~~., ~._..~._.~
The vehicle shall include a cellular telephone and car kit. The telephone shall be a current model
Motorola Flip telephone. The car kit shall be for the current model Motorola telephone and
include hands free -operation. rooftop dual band antenna. and a cellular telephone charging. The
front car kit shall be mounted on the center console within easy reach of the driver. The
telephone instaHation shall be done within the prime contractor's facility by their employees.
ANTENNAS
Theyehicleshall have six antennas mounted on the roof. One antenna shall be a ~ wave VHF
radlo'antenna:-two antennas shall be 800 Mhz ~~ wave antennas. one antenna shall be an 800Mhz
3Db gain for the MDC. one shall be a dual band antenna for the cellular telephone car kit, and
the last antenna shall include a rain cap and be mounted for future use. All antennas shall utilize
3/4" nmo bases with RG-58 cable (except cellular).
12 VOLT HAND HELD RADIO CHARGER INSTALLATION
The vehicle shall include installation of a customer supplied Motorola charger for the portable
radio. The charger shall be mounted within reach of the driver in the center console area. The
charger shall be wired direct to battery for full time charging.
BIDDERS REQUIREMENTS
1. All bidders shall supply a list with a minimum of five customers that have recently purchased
such vehicles from the bidder at the time of bid. The list shall include telephone numbers. names
and addresses.
2. All bidders shall submit a copy of their specifications of the vehictebeing bid on at the time of
bid. Photocopies or word for word copies of the bid specifications will not be allowed.
3. All bidders shall supply a list of exceptions to the vehicle specifications being bid on at the
time of bid. The list shall be listed in the order of the vehicle specifications and be numbered.
4. The awarded bidder shall conduct a pre-construction meeting at the fire department
headquarters prior to any worle being started to establish final installation locations of all itemS in
this bid. Additionally. the awarded bidder shalt conduct a final inspection meeting to insure
satisfaction of the completed vehicle..
5. Any bidders who take exceptions to the Technical Specifications maybe cause for rejection of
bid. Check "As Specified" if item is exactly as set forth in the Technical Specifications.
Signature
_ Not as Specified
Title Ot,';1'\P r
16